Siirry sisältöön
Home » Hammers » Dominator Range » 5” Super Dominator 500 – DHD350

5” Super Dominator 500 – DHD350

Super Dominator 500 is a class leader in performance and is suitable for drilling at a wide range of air pressures but excels at high working pressures.

Combining the raw power of the Super Dominator 500 with extended life for abrasive conditions, the Super Dominator 500 has a one piece top adaptor with N.R.V (Non Return Valve) fitted for easy inspection and an integral finger to reduce maintenance and eliminating shimming.

The Super Dominator 500 has no liner which increases the piston blow energy and reduces parts required.

At a Glance
Air pressure
Air flow
140mm - 165mm
5 1/2 - 6 1/2"
100 - 507 psi
(7 - 35 bar)
180 - 1180 cfm
5097 - 33414 l/min
Hammer Overview
Hammer Model Super Dominator 500
Part Number 600267
Shank DHD350
Thread Connection 3 1/2" API Reg Pin Up
Minimum Bit Diameter140mm
Hammer Flat Size90mm (3.54")
Weight 58.0 Kg (83.8 lbs)
Outside Diameter 118mm (4.65")
Length (shoulder to shoulder) 975mm (38.40")
Minimum Weight On Bit400 Kg (900 lbs)
Maximum Weight On Bit900 Kg (1980 lbs)

Air Consumption

Parts List Maintenance Kits
Type Super Dominator 500 Service Kit Repair Kit
Shank DHD350
Item Description Part No. SK42 RK72
1Thread Protector201701NoNo
2Snap Ring783028YesYes
3N.R.V Seat603510NoYes
5Non Return Valve603554NoYes
6N.R.V Spring760135YesYes
7N.R.V Shield603652YesYes
8Top Adaptor603513NoNo
13Snap Ring783025YesYes
14Bit Retaining Ring602706NoYes
15Chuck Lock Ring603104YesYes
16Chuck Spacer602433YesYes
Foot Valve601902NoYes

Related Bits